Search
Filters
Close

Siporex Lightweight 4 Inch AAC Blocks

AAC Blocks Can Be Used In External as well as Internal Walls They are manufactured as per IS 2185 - 1984 and Masonry is carried out as per IS 1905-1987 There Work-ability is better then Wood. It is a lightweight, precast building material that simultaneously provides structure, insulation, and fire and mold resistance.
Free shipping

ADVANTAGES OF SIPOREX

» More carpet area is available in the same built up area due to lesser widths of walling and cladding with SIPOREX blocks of 200 mm, 150 mm & 100 mm as against 350 mm, 230 mm & 115 mm in case of conventional brick masonry.

» Fast returns on investment due to speedy construction.

» Saving in Cement, Steel construction supervision cost, construction time, water requirements for construction, timber required for centring /shuttering etc.

» Uniform quality due to mass production in the factory.

» Due to high insulation properties of Autoclaved Aerated Concrete, there will be substantial saving in installation and recurring cost of air conditioning units.

» Siporex Blocks are wire cut & are having plain surface. In view of this, the Plaster for internal walls is not required & directly Putty & Painting can be done, saving the plastering cost. However, External Plastering is recommended for AAC Blocks.

WHY SIPOREX BLOCKS?

  • LIGHT WEIGHT
  • EARTHQUAKE RESISTANT
  • COMFORTABLY WORKED
  • HIGHLY INSULATING
  • LESS WATER PENETRATION
  • ENVIRONMENTAL FRIENDLY
  • FIRE RESISTANT & INCOMBUSTIBLE
  • SOUND ABSORPTION
  • ISI MARK & NORMS

 

AAC Blocks Technical Specifications

 

 

Thickness

Height

Length

Density

Compressive strength

100 mm

200 mm

600 mm

550-700 kg/m3

30 - 50 kg/cm2

150 mm

200 mm

600 mm

550-700 kg/m3

30 - 50 kg/cm2

200 mm

200 mm

600 mm

550-700 kg/m3

30 - 50 kg/cm2

ADVANTAGES OF SIPOREX

» More carpet area is available in the same built up area due to lesser widths of walling and cladding with SIPOREX blocks of 200 mm, 150 mm & 100 mm as against 350 mm, 230 mm & 115 mm in case of conventional brick masonry.

» Fast returns on investment due to speedy construction.

» Saving in Cement, Steel construction supervision cost, construction time, water requirements for construction, timber required for centring /shuttering etc.

» Uniform quality due to mass production in the factory.

» Due to high insulation properties of Autoclaved Aerated Concrete, there will be substantial saving in installation and recurring cost of air conditioning units.

» Siporex Blocks are wire cut & are having plain surface. In view of this, the Plaster for internal walls is not required & directly Putty & Painting can be done, saving the plastering cost. However, External Plastering is recommended for AAC Blocks.

WHY SIPOREX BLOCKS?

  • LIGHT WEIGHT
  • EARTHQUAKE RESISTANT
  • COMFORTABLY WORKED
  • HIGHLY INSULATING
  • LESS WATER PENETRATION
  • ENVIRONMENTAL FRIENDLY
  • FIRE RESISTANT & INCOMBUSTIBLE
  • SOUND ABSORPTION
  • ISI MARK & NORMS

 

AAC Blocks Technical Specifications

 

 

Thickness

Height

Length

Density

Compressive strength

100 mm

200 mm

600 mm

550-700 kg/m3

30 - 50 kg/cm2

150 mm

200 mm

600 mm

550-700 kg/m3

30 - 50 kg/cm2

200 mm

200 mm

600 mm

550-700 kg/m3

30 - 50 kg/cm2

Recently viewed products
banner